Halo Project Update

So do to the weather and just being busy in general, I really haven't had a chance to work on my halo suit.  I did manage to get some progress on a few of my weapons. 

I'll start off with the most exciting of the weapons first my Halo 3 Battle Rifle.  Much thanks to my sister I have finally managed to get a Nerf Longshot, they stopped selling these a few years ago, and the only real way to get them is on eBay.  I plan on fully modding the blaster and going to use parts of the front gun to pull off the look of the battle rifle.

The next one is my assault rifle, this one is going to take alot if time to get just right.  I plan on using a Nerf Rayven for the base of the gun and going to make the front part of it with pepakura.  Also planning on integrating a full ammo counter and make a speaker for like clip reload noises etc.  The assault rifle will also have mag light mounted in the front just like it does in the game.  Not sure what all electronics will be added into this gun before it's all said and done, but it should be very impressive.

The last halo blaster i have planned is the Spiker.  This is a relatively easy to do.  The base is going to be a Nerf Maverick and the blades will be made with pepakura.  Most of this project will focus on the paint and cosmetics.  The performance of mavericks are very lacking compared to other Nerf mods, but it is one of the cooler looking blasters.  The maverick will have all the standard mods (including the Russian roulette mod), and maybe even a spring upgrade.

Well that's about it for this post, hopefully i can get around to doing an armor update later this week.

For those of you who are interested in playing Nerf please get contact with me again, I think I have enough people interested in playing to be able to get games going.  I am going to start collecting deposits to cover start up costs, this will also give me s good headcount.  You can either contact me here or through email at kidnicky@bellsouth.net or stalkervenom@gmail.com, or on Facebook.

Happy New Year - Halo Chest Piece

First off I would like to wish everyone a happy new year.  I have been sick over the past few days, so I have not been working on my blog or any of my projects.  Hopefully I will start feeling better soon and get back to work. 

Halo 3 Assault Rifle

Good news, today I was able to pick up the base gun for my assault rifle project.  I would like to thank my buddy Wes for helping me get it!  I plan to start working on this project this week.  Not sure when I expect to finish this one, I have to order quite a bit of electronics off the internet to get it done.  Like I said last week, this gun hopefully have everything that it does in game, including: flashlight, heads-up display, working ammo counter, and all the cosmetics to make it look perfect.

My Halo armor is coming along quite well, I got a dremel for Christmas so I can sand off all the fiberglass bubbles.  The helmet is almost ready for bondo, just have to touch up a few things.  I currently have 5/15 pieces constructed and waiting to be fiber glassed.  

Halo Chest Piece - Pepakura File

The chest piece came together faster then I expected, I think it took me a total of 3 hours to completely cut it out and put it together.  All together it was about 34 sheets of paper to complete it.  It fits on pretty tight, I might end up having to cut it either in two pieces to be able to get in on when everything is all said and done, I will just have to wait and find out.  But anyways here are a few pictures of it, and one with me wearing the helmet and the chest piece.

Front View

Right Side Angled

Left Side Angled

Back Side

Me with Helmet and Chest Piece on

Projects Update

Well I would like to start off giving you guys a quick status update of my planned out projects.  This does not include any kind of order or anything.

Halo Armor Suit - I have got 5/15 pieces constructed so far.  Due to the weather (I can not fiberglass if its below 45 degrees outside), this project might go on a bit of a hold.  I do not want to build up a bunch of paper armor pieces that I can not reinforce.  If I can find a place I can store all the pieces I will continue to construct them, but the project as a whole will most likely not be finished until spring.

 

Needle Rifle -  I am really excited to be finally starting this project.  The base of gun is going to be a homemade nerf gun.  This will be the first spring powered homemade nerf gun I will have made ( I tried a while ago and failed, did not make the plunger head seal well ).  I will actually be following a guide this time so hopefully everything will work when its done.  The shell of the gun will be made the same way I have been making my armor suit, but because I can not find a pepakura file of the needle rifle, I will have to make this from scratch.  I have not worked out all the fine details of this project, but I am hoping I can add some nice LED lighting on this project.

Halo Assault Rifle -  I came up with this project in the past two days.  I don't know how much I really want to give out about this project.  I will how ever say that the base of this gun will be a modded Nerf gun ( I do not currently have the gun for this project yet ).  I will be replacing most of the internals on this gun to increase the performance, and also adding a flash light, and display to simulate the gun in the game.

 

Halo Spiker - Most of this project will be just seeing how much cosmetic parts I can add to a Nerf Maverick, and it still function properly.  I have two modded Mavericks that I picked up at either goodwill or for a very low price.  Not sure what all I will actually be able to add, have to see as I go, but the I will be making the blades, trying to wrap the handle in leather, and hopefully a few more cosmetic mods.

That is about it for the updates, I will be posting the write up for the chest piece in the next few days.  If you guys have any other ideas for working replicas from video games or another projects you think I can create, I would love to hear about them.  Always looking for new ideas for projects!